Tabla de contenido
Idiomas disponibles
Idiomas disponibles
LumaPro Operating Instructions
Installation & Operation:
removing the appropriate fuse at the fuse box. Turning the power off using the light
switch is not sufficient to prevent electrical shock.
1.
Remove 4 screws from fixture door assembly
2.
Locate mounting holes and install treaded rods (2) through fixture wall and
support plate
3.
Secure one end of rods with hex nuts and washers until rod sticks out by at least
two treads
4.
Slip treaded rod through mounting arm and secure mounting arm in place allowing
remaining threads to be exposed for pole or wall mounting
5.
Attach fixture with arm to pole or wall mount and secure in place adjusting threaded
rod as needed.
6.
Close fixture door assembly and secure with four screws.
7.
Turn power on to test fixture operation.
Warranty
LIMITED FIVE-YEAR WARRANTY
Should this product fail to perform satisfactorily due to a defect or poor workmanship within
FIVE YEARS from the date of purchase, return it to the place of purchase and it will be replaced,
and free of charge. Incidental or consequential damages are excluded from this warranty.
Manufactured for Grainger International, Inc.
100 Grainger Pkwy., Lake Forest IL 60045 U.S.A.
Disconnect the power by turning off the circuit breaker or by
140W LED Area Light
4
45C243
Tabla de contenido
