Aux In Operation; Usb Operation; Usb Recording - Denver MRD-51 Manual De Usuario

Note: Do not turn or stop the turntable manually. Moving or jarring the turntable without securing the
tone arm clamp could result in damage to the tone arm.

AUX IN OPERATION

Connect the audio system into the AUX IN jack on the rear panel, Press the PHONO/AUX IN button. Start
playing from the connected device.

USB OPERATION

1. Press the CD/USB button first and the FUNCTION button to enter USB mode. The '---' and USB icon will
be shown.
2. Insert a USB flash device into the USB socket.
3. PLAY/PAUSE, DN/UP and stop functions are the same as CD functions.
Note: You may press the FUNCTION on the panel or long press PLAY/PAUSE button on the remote control
for 2 seconds to change the playing mode between CD and USB.
PLAYING IN MP3 MODE (CD/USB)
1. Press PLAY/PAUSE button to start or pause playback selected track.
2. While playing the song, the song number and folder number of the selected track will be shown in
the display.
3. You can stop the playback at any time by pressing the STOP button.
TRACK SKIP AND HIGH SPEED TRACK SEARCH IN CD/USB MODE
During CD/USB playback press UP/F.F ( ) or DN/F.R (
remote control repeatedly to change track. To rapidly search forward or backwards within a track press
and hold UP/F.F (press UP/F.F (
press TRACK-10 or TRACK+10 on the remote control.

USB RECORDING

1. CD recording
Insert USB flash drive into the USB socket. Then press CD/USB button. Place CD into the CD drawer and
play the track which will be recorded. Press RECORD button twice to start recording. If all CD is played,
Then all tracks will be recorded. NOTE: Recording will fail if pressing STOP button during recording
) button on the unit front panel or on the
) or DN/F.R ( ) button. To skip 10 tracks back or forth then
10