Initial Operation - Winix ZERO Pro Manual De Usuario

INITIAL OPERATION

Insert the unit plug into an electrical outlet.
①
ˍ The Control Panel lights will turn on and
off.
Press the 'Power' button.
②
NOTE
By default, when the unit first powers on, the
③
mode will be set to Auto with PlasmaWave
enabled.
ˍ When in Auto Mode the fan speed will
be automatically adjusted according to
the environments air quality.
ˍ PlasmaWave
airborne contaminants.
NOTE
English
ˍ During the first 4 minutes of power up, the Air Quality light
will flash as the Smart Sensors measure the air quality in the
environment, after which normal operation will begin.
® works to remove harmful
ˍ In Auto mode, as the indoor air quality improves, the fan
speed will automatically be reduced to Low.
ˍ When the unit is running, you may hear a chirping or buzzing
sound. The sound is from large particles passing through
PlasmaWave ® , it is normal and does not signify product
failure. To disable PlasmaWave
®
®
, see page 11.
ZERO Pro
9