Guide Bar Maintenance - sunjoe iON8PS2-LT Manual Del Operador

Fig. 29
Cutting edge

Guide Bar Maintenance

When the guide bar shows signs of wear, turn it over on the
saw to distribute the wear for maximum bar life. Feathering or
burring of the bar rails is a normal process of bar wear. You
should smooth such faults with a file as soon as they occur.
Replace a bar with any of the following faults:
• wear inside the bar rails permitting the chain to
lay over sideways
• bent guide bar
• cracked or broken rails
• spread rails
Chain Maintenance Table
Drive Links
40
Inspection tool
Depth
limiter
tooth
Depth limiter tooth
Chain Pitch
inches mm
3/8 9.5
19
Turn the saw over, check the underside of the guide bar and
make sure that the lubrication holes and chain groove are free
from impurities.
You can purchase replacement parts for your Sun Joe
iON8PS2-LT cordless pole chain saw by ordering online at
snowjoe.com or, to order by phone, contact Snow Joe
Sun Joe customer service at 1-866-SNOWJOE ®
(1-866-766-9563).
Chain Sprocket
Regularly check the condition of the sprocket and replace it
when wear exceeds 0.5 mm (Fig. 30).
Do not mount a new chain with a worn sprocket or vice-versa.
Fig. 30
Chain Gauge
inches mm
0.050 1.3
®
+
®
< 0.5 mm
File Diameter
inches mm
5/32 4