Tekmar Net2 528 Guía De Instalación Rápida página 4

8.
Critical Settings (Continued)
Display
ADJUST ADJUST
SUPPLY
H1 H1
ADJUST ADJUST
SUPPLY
H1 H1
For a full list of settings and operational details, please refer to the thermostat
Installation and Operation Manual (528_D) included with compatible
tekmarNet controls or download the brochure from www.tekmarcontrols.com
®
All specifications are subject
to change without notice
Range
°F or °C
Default =
°F
Set To:
OFF or
On
Default =
On
Set To:
OFF or
On
Default =
OFF
Set To:
On or Off
Default =
On
Set To:
Off,
Room,
Outdoor,
Floor,
Floor dSP
Set To:
Product design, software and literature are Copyright ©2014 by tekmar Control Systems Ltd.,
A Watts Water Technologies Company. Head Offi ce: 5100 Silver Star Road, Vernon, B.C.
Canada V1B 3K4, 250-545-7749, Fax. 250-545-0650 Web Site: www.tekmarControls.com
Access
TEMPERATURE UNITS
Installer
Press the
User
change from °F to °C and vice versa.
HEAT SUPPLY PUMP
During heating, select whether or not
the system supply pump should turn
on or be off to allow a zone group
Installer
pump per manifold.
Available when:
• A reset control is present on the
tekmarNet
HEAT SUPPLY PUMP DELAY
During heating, select whether or not
the system supply pump should be
delayed by 3 minutes before coming
Installer
on (for thermal motor or wax actuator).
Available when:
• A reset control is present on the
tekmarNet
ROOM SENSOR
Select whether the built-in air
temperature sensor is on or off.
Available when:
Installer
A floor sensor or room sensor is
installed on the auxiliary sensor
input.
AUXILIARY SENSOR
Select the type of auxiliary sensor.
Floor dSP = Show floor sensor reading
in upper number field.
Installer
Available when:
Auxiliary sensor automatically
detected.
4
Description
or the
button to
system.
®
® system.
528_Q - 02/14.