Installation - Glacier bay HD67140W-6101 Guía De Instalación Y Cuidado

Installation

1
Installing the faucet assembly
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□
Shut off the water supply. Remove the old
faucet.
□
Clean the mounting surface.
□
Before installation, drill three holes on the wall.
The valve access hole should be 1-1/2 in. to
1-3/4 in. diameter. The recommended valve depth
to the nished wall min. 2 in. to max 3-1/2 in..
Finished wall
10-3/5 in.
2 in. to 3-1/2 in.
8 in.
2
Securing the valve body
□
Secure the valve body (H) with the screws (I).
Use a Phillips screwdriver to tighten the screws (I).
H
4
I