Menu Items - Onkyo UDB-1 Manual De Instrucciones

EN FR ES
∫ Changing the order stations are displayed
You can sort the available stations alphabetically or by multiplex.
1. Press MODE on the remote controller or TUNING MODE on the main unit to select "Alphabet" or "Multiplex".
∫ Displaying DAB Radio Information
Press on the remote controller or INFO on the main unit to see details about the station currently tuned. The display changes in
the following order each time you press the button.
1. DLS (Dynamic Label Segment) : The text information being broadcast is displayed if the station is streaming DLS text
information.
2. Program Type : Displays the type of program.
3. Bit Rate and Audio Mode : Displays the station's bit rate and audio mode (Stereo, Mono).
4. Signal Quality : Displays the signal quality.
* 0 – 59 : Poor reception, 60 – 79 : Good reception, 80 – 100 : Excellent reception
5. Multiplex Name : Displays the name of the current multiplex.
6. Multiplex Number and Frequency : Displays the number and frequency of the current multiplex.

∫ Menu items

The following items are added to the Setup menu when you connect this unit to the other device.
Miscellaneous >> Tuner
DAB Auto Scan
DAB DRC
Initialize DAB
IT DE NL
You can run the auto scan when new DAB stations are added or when you move house.
With the DRC (Dynamic Range Control) setting, you can reduce the dynamic range of DAB
digital radio so that you can still hear quiet parts even when listening at low volume levels -
ideal for listening to the radio late at night when you don't want to disturb anyone.
"Off (default value)" : DRC off
"Large" : Large reduction in dynamic range
"Small" : Small reduction in dynamic range
This initializes the unit. Initialize the unit when disposing of it, giving it to another person, or if
operation becomes unstable.
1. Press ENTER on the remote controller when "Start" is displayed.
2. With the cursors on the remote controller, select "Yes", and then press ENTER.
0 The scan information is deleted when you initialize the adapter.
0 When you have initialized the unit for the purpose of disposing of it or giving it to another
person, remove this unit from the connected device when initialization is complete. If DAB
is selected as the input again when this unit is inserted, the automatic scan for stations
starts.
0 When you have initialized the unit because operation was unstable, once initialization is
complete, remove the unit then insert it again.
– EN 2 –
SV RU AR JP
繁中