ASROCK 890GX Extreme4 Manual Del Usuario página 20

Step 2. Connect two Radeon graphics cards by installing CrossFire Bridge on
CrossFire Bridge Interconnects on the top of Radeon graphics cards.
(CrossFire Bridge is provided with the graphics card you purchase, not
bundled with this motherboard. Please refer to your graphics card vendor
for details.)
CrossFire Bridge
Step 3. Connect the DVI monitor cable to the DVI connector on the Radeon graphics
card on PCIE2 slot. (You may use the DVI to D-Sub adapter to convert the
DVI connector to D-Sub interface, and then connect the D-Sub monitor
cable to the DVI to D-Sub adapter.)
2.6.1.2 Installing Three CrossFireX 2.6.1.2 Installing Three CrossFireX 2.6.1.2 Installing Three CrossFireX 2.6.1.2 Installing Three CrossFireX 2.6.1.2 Installing Three CrossFireX
Cards Cards
Cards Cards Cards
Step 1. Install one Radeon graphics card to PCIE2 slot. For the proper installation
procedures, please refer to section "Expansion Slots".
2 0 2 0 2 0
2 0 2 0
ASRock
or
-Ready Graphics -Ready Graphics -Ready Graphics -Ready Graphics -Ready Graphics
TM TM TM
TM TM
890GX Extreme4 Motherboard