Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 13

Enlaces rápidos

Installing the LSI 9285 PCIe Card on
Dell PowerEdge C6220 Systems
Follow the procedure in this document to install the LSI 9285 PCIe card on your
Dell PowerEdge C6220 1U node.
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your product
documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty.
Read and follow the safety instructions that came with the product.
The following items are available in the PCIe card kit:
LSI 9285 PCIe card
rubber jumper
To install the LSI 9285 PCIe card:
1 Turn off the system, including any attached peripherals, and disconnect the
system from the electrical outlet.
2 Open the system.
3 Locate the jumper PCN3 on the system board.
4 Ensure that you place the rubber jumper on pin 2 of the system-board jumper.
For more information see Figure 1.
All manuals and user guides at all-guides.com
loading

Resumen de contenidos para Dell LSI 9285

  • Página 13 La garantía no cubre los daños ocasionados por reparaciones que Dell no haya autorizado. Lea y siga las instrucciones de seguridad entregadas con el producto.
  • Página 14 © 2013 Dell Inc. Impreso en los EE.UU. Marcas comerciales utilizadas en este texto: Dell™ y el logotipo de DELL son marcas comerciales de Dell Inc. LSI es una marca comercial o una marca comercial registrada de LSI Corporation o de sus filiales. 04/2013...