Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Specifications
Technology
Biometry and Proximity (125 Khz, EM)
Use
Outdoors
Finger and Keypad
Authentication
Fingerprints per user
1-10 fingerprints
PIN code length
1 to 8 digits
Wiegand 8 to 128 bits; Default: Wiegand 26bit
Interface
Protocol programming
By software
50m
Cable distance
Fingerprint Sensor Type
Swipe Capacitive
970 msec, including feature extraction time
1:1000 identification time
Fingerprint enrolment
On the reader or from the USB desktop reader
Cable, 1m
Panel Connection
Externally Controlled
Green and Red LED
Orange LED
Idle mode
Buzzer ON_OFF
Yes
Mounting
1.
5mm
Recommended swipe technique
Follow the below instructions for correct finger swiping. Starting from the first finger joint, place the selected
finger on the swipe sensor and move it evenly towards oneself in one steady movement.
Result:
For a valid swipe: Tricolour Status LED turns green + OK Beep(short + long beep)
For an invalid or misread swipe: Tricolour Status LED turns red + Error Beep ( 3 short beeps)
x 6
The fingerprints are enrolled in the system by swiping the finger a minimum of 6 times.
Indication
2.
4 (4 x 30mm)
Green
- Access granted
Red
- Access denied
Orange
- Idle mode
Backlight ON_OFF
Tamper
Consumption
IP Rating
Power supply
Operating Temperature
Dimensions (mm)
Housing
Storage_Operating Humidity
94 mm
3.
OK beep
- short + long beep
ERROR beep
- 3 short beeps
Swipe finger - 2 short beeps
Yes, by software settings
Yes
Max. 150mA
IP65
9-14 Vdc
-20°C to +50°C, non-condensing
100 x 94 x 30
Moulded Aluminium
5% to 93% RH without condensation
100 mm
30 mm
4.
EN
Tabla de contenido
