SoliTherm CC 3015 Manual De Instrucciones

CC 301
e-Thermostats / e-Hygrostats
e-Thermostate / e-Hygrostate
e-Thermostat / e-Hygrostat
e-Termostato / e-Hygrostato
e-Termostato / e-Umidostato
Doc No: 596005361 Rev.2.5
1
1 + 2
Installation
Montage
Montage
Montaje
Montagem
2
3
3 + 4
Removal
Demontage
Démontage
Desmontaje
Desmontagem
4
39 [1.54] 53.3 [2.10]
2
3
Ө
L/24V N/
COE
1
2
Control range / Regelbereich / Gamme de réglage /
Rango de ajuste / Faixa de controlo
DC THERMOSTAT (°C) 0 - 60°C, 24 V DC
DC THERMOSTAT (°F) 32 - 140°F, 24 V DC
DC HYGROSTAT (%r.H.) 30 - 90 %, 24 V DC
External sensor + cable for
TEMPERATURE SENSOR
thermostat
External sensor + cable for
HUMIDITY SENSOR
hygrostat
3
Safety Information
These components must be installed / serviced
by qualified personnel complying
relevant safety regulations in force and in
accordance with the wiring diagram
on the housing / represented in this manual.
Ensure manuals are kept in a secure place
accessible to servicing / installing personnel.
Device description
These devices have been designed specifically for
electrical enclosure temperature/humidity control.
Type
Knob colour
White Electronic adjustable thermostat
Orange Electronic adjustable hygrostat
Installation
The devices have been designed
installation on a DIN EN 60715 compliant rail.
For correct operation note the following:
● Device must be mounted VERTICALLY (do not
mount in any other position)
● Device must be mounted with a minimum of
30mm clearance around it to avoid covering of the
ventilation slots.
● Device must be mounted as far as possible from
heat generating components
Switching capacity 16 A, resistive load
Hysteresis 3K / 5%
Switching tolerance ±5K / 10%
Rate of temperature
max. 1K/min.
change
Operating temperatures:
-25ºC - 70ºC
Thermostats / Hygrostats
-13ºF - 158ºF
-45ºC - 120ºC
Temperature sensor
-49ºF - 248ºF
-40ºC - 85ºC
Humidity sensor
-40ºF - 185ºF 100%r.H.
Connection: 0.5 - 2.5 mm² / 14 - 20 AWG screw
terminal, Housing Material: Plastic UL94V-2
NOTE: To prevent damage to the contacts caused
by rapid switching, the device has a minimum ON
time and minimum OFF time of 2 to 3 minutes.
TO FIT SENSOR: 1. Remove blanking cover using
a screwdriver. 2. Insert centering ring with notch
positioned as shown. 3. Plug in sensor jack (sensor
housing colour must be of same colour as the
knob).
EN
with the
shown
for