Important Safety Instructions - Sengled C01-BR30NA AMP Manual De Instrucciones

To delete a connected AMP from the Master bulb
1. Ensure that the Pulse Master bulb and Pulse Amp devices are powered on and paired with your
smart device via Bluetooth
2. Launch the Pulse App
3. Simply switch the Main Brightness ON/OFF button to confirm that all Pulse bulbs are connected
under the same Master Bulb
4. Select the "Edit Label of Bulbs" tab in the Settings menu.
5. Select the AMP that you want to remove from the Audio Network, click Delete/Close button.
6. A delete confirmation will appear on the screen, click "OK" to continue
7. Wait for approximately 30 seconds. Do not power off the devices during this process
8. Click the "Refresh" tab in the Settings menu to confirm the device has been removed

IMPORTANT SAFETY INSTRUCTIONS

 Read and keep these safety instructions.
 Heed all warnings contained within these instructions.
 Please follow all user manual instructions when installing the product.
 Only clean SENGLED product only with a dry towel.
 This Product is intended for indoor use only.
 Do NOT use this product outdoors.
 Do NOT get this product wet and do NOT use near any water source.
 The product should not be exposed to dripping or splashing liquids of any kind.
 Do not install the product near any heat sources, such as heater, radiators, stove, heat registers or
other apparatus that produce heat.
 Ensure that the product is stable and secured in place during installation. If the product is dropped or
falls out of the power socket, it may cause bodily harm.
 If the product is dropped or falls out of the power socket, it may be damaged. Please check the
product for any visible damage.
 To reduce the risk of electric shock, do NOT remove the back cover or take apart. There are no
serviceable parts inside.
 To prevent product failure, the product should only be installed in operating environments ranging
between -4 degrees Fahrenheit and +104 degrees Fahrenheit (-20 degrees Celsius and +40 degrees
Celsius).
 Never push any objects into the openings or slots on the product. Doing so may create an electric
shock or fire hazard.
 Maintain sufficient distance around your product for sufficient ventilation;
 For best protection against lightning, unscrew the product from its power source during a storm.
 Only use accessories specifically recommended by the manufacturer.
 Refer all servicing to qualified SENGLED service technician.
 Servicing is required when the product:
1. Has been damaged in any way
2. Liquid has been spilled on the product
3. Objects have fallen into the product
4. The product has been exposed to rain or moisture
5. The product does not operate normally, or has been dropped
 Repairs must be performed by a qualified SENGLED technician.
 The product can be hot and should not be touched without taking care.