Troubleshooting - Klarstein VENDETTA 3.0 TI Manual Del Usuario

TROUBLESHOOTING

Problem
The burner does not
start when using the
ignition system.
The burner cannot be
lit with a match.
Low flame or flashback
Possible cause
The gas cylinder is empty.
Faulty pressure regulator.
Blockage in the burner.
Blockage in the gas
nozzle or hose.
Wire of the electrode is
loose and disconnected
from the electrode
or ignition unit.
Electrode or wire
damaged. Faulty
ignition switch.
The gas cylinder is empty.
Faulty pressure regulator.
Blockage in the burner.
Blockage in the gas
nozzle or hose.
The gas cylinder
is too small.
Blockage in the burner.
Blockage in the gas
nozzle or hose.
Windy conditions.
Solution
Replace with a full
gas cylinder.
Check or replace the
pressure regulator.
Clean the burner.
Clean the gas
nozzle and hose.
Reconnect the wire.
Replace electrode or wire.
Replace with a full
gas cylinder.
Check or replace the
pressure regulator.
Clean the burner.
Clean the gas
nozzle and hose.
Use a bigger gas cylinder.
Clean the burner.
Clean the gas
nozzle and hose.
Use the grill in a
sheltered area.
EN
53