Better Homes and Gardens BH15-084-899-07 Manual De Instrucciones página 17

Tools required (not provided): Phillips screwdriver, stud finder, power drill and 1/8" drill bit.
25. Ask for assistance to position the assembled unit at the desired location against a wall.
26. In case of uneven floors, the Floor Levelers are provided at the bottom of front legs for the necessary
adjustment. To adjust the unit, simply tilt the unit back and then adjust the floor levelers by hand to
correct tilting and/or level the doors.
27. Now, follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware to
attach the tip-over restraints to the unit and the wall, as shown in the illustration.
NOTE:
The tipping restraint hardware included is for wooden stud wall construction. It must be attached to a
wall stud. Depending upon your wall construction, different anchor hardware maybe required. Please contact
your local hardware store for assistance. Young children can be seriously injured by tipping furniture. You must
install the Tipping Restraint Hardware with the unit to prevent the unit from tipping, causing any accidents or
damage. The tipping restraints are intended only as a deterrent, they are not a substitute for proper adult
supervision. The tipping restraints are not earthquake restraints. If you wish to add the extra security of
earthquake restraints, they must be purchased and installed separately.
Assembly Instructions
B
WARNING
Children have died from furniture tip-over.
To reduce the risk of furniture tip-over:
ALWAYS install tip-over restraint provided.

NEVER exceed the maximum size and weight of the TV

shown in the instructions.
NEVER allow children to stand, climb or hang on drawers,

doors, or shelves.
NEVER open more than one drawer at a time.

Place heaviest items in the lowest drawers.

Use of tip-over restraints may only reduce, but not
eliminate, the risk of tip-over.
17
A
C