Lenco SCD-430RD Manual Del Usuario página 13

AUTO STOP
When the tape reaches the end during playback, the built-in auto
stop system will release the depressed play key.
CARE OF CASSETTE MECHANISM
Gently clean the tape head and pinch wheel/capstan assemblies after
every 10 hours of using the unit. A range of cassette care products are
available.
The erase head and play head and the surface of the pinch roller are
delicate and must not be touched with metal objects such as
screwdrivers. You may find it easier to clean the assembly by pressing
the PLAY button to bright head and pinch roller into view. Be sure to
press the STOP button after cleaning the mechanism.
Damage to the pinch wheel can occur if the unit is left in PLAY mode
with the power switch off. Under no circumstances should you
attempt to lubricate any part of the machine.
CD/MP3 OPERATION
LOADING A DISC
1. Set the FUNCTION switch to CD/MP3/AUX position.
2. Open the CD door.
3. Place an audio CD into the tray with the label side facing up.
4. Close the CD door.
The total number of tracks will appear on the display after several
seconds.
5. To remove the CD, press to open CD compartment lid, grasp the
CD by its edges, and carefully take it out.
Note:
⚫ To ensure good system performance, wait until the disc tray
completely reads the disc before proceeding.
⚫ If no disc is loaded into the compartment, or the disc is placed
upside down, the display will show N0d.