Technical Data - DeWalt DE7464 Manual Del Usuario

E N G L I S H
RIPPING SUPPORT SYSTEM DE7464
Congratulations!
You have chosen a D WALT product. Years of experience, thorough
E
product development and innovation make D
reliable partners for professional users.
Table of contents

Technical data

Manufacturer's declaration
Safety instructions
Package contents
Description
Assembly and adjustment
Maintenance
Guarantee
Technical data
Length
Width
Height
Front rail length
Weight
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or damage to the tool
in case of non-observance of the instructions in this manual.
Manufacturer's declaration
DE7464
D WALT declares that this unit has been designed in compliance with
E
98/37/EEC.
This unit must not be put into service until it was established that the
Power Tool to be connected to this unit is in compliance with 98/37/EEC
(identified by the CE-marking on the Power Tool).
Director Engineering and Product Development
Horst Großmann
D WALT, Richard-Klinger-Straße 40,
E
D-65510, Idstein, Germany
en - 1
WALT one of the most
E
en - 1
en - 1
en - 1
en - 1
en - 2
en - 2
en - 4
en - 4
DE7464
mm 990
mm 687
mm 863
mm 1,300
kg 20
Safety instructions
Observe the safety regulations in the instruction manual of the Power
Tool to be connected to this attachment. Also observe any applicable
additional safety rules. Read the following safety instructions before
attempting to operate this product. Keep these instructions in a safe
place!
General
1 Keep work area clean
Cluttered areas and benches can cause accidents.
2 Keep children away
Do not let children come into contact with the tool or its attachments.
Keep all people away from the work area.
3 Dress properly
Do not wear loose clothing or jewellery. They can be caught in moving
parts. Preferably wear rubber gloves and non-slip footwear when
working outdoors. Wear protective hair covering to keep long hair out
of the way.
4 Wear safety goggles
Also use a face or dust mask in case the operations produce dust or
flying particles.
5 Beware of maximum sound pressure
Take appropriate measures for the protection of hearing if the sound
pressure of 85 dB(A) is exceeded.
6 Stay alert
Watch what you are doing. Use common sense. Do not operate the
tool when you are tired.
7 Use appropriate tool
The intended use is laid down in this instruction manual. Do not force
small tools or attachments to do the job of a heavy-duty tool. The tool
will do the job better and safer at the rate for which it was intended.
Warning! The use of any accessory or attachment or performance of
any operation with this tool, other than those recommended in this
instruction manual may present a risk of personal injury.
8 Have your Power Tool Attachment repaired by an authorized
D WALT repair agent
E
Repair of your Power Tool Attachment being a matter of precision and
skill, always take it to your D
Package contents
The package contains:
1 Box containing:
1 Ripping support table
1 Leg brace
1 Support bracket
2 Lower support rails
3 Flat brackets
1 Box containing:
1 Front support rail
1 Rear support rail
2 Legs
2 Feet
1 Torx wrench T50
1 Allen key 6 mm
8 Hex head bolts M10 x 35
5 Hex head bolts M10 x 25
11 Coach bolts M8 x 20
6 Torx bolts T50, M10 x 30
13 Hex nuts M10
25 Hex nuts M8
6 Hex jamnuts M10
25 Lock washers 8 mm
WALT Authorized Repair Agent.
E
10