Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Engine Timing Tool Set for BMW N20 / N26
TOOLS
1 Crankshaft Locking Tool,
to be used as OEM 2219548
2 Camshaft Adjusting Tool,
to be used as OEM 2212831
3 VANOS Adjusting Tool,
to be used as OEM 2212830
4 Timing Chain Pre-Tensioner,
to be used as OEM 119340
INTENDED USE
This tool set is used for adjusting the engine timing on BMW 1.6 & 2.0L petrol engines N20 B16A,
N20 B20, N20 B20A, N20 B20B, N20 B20/U0, N20 B20O0, N20 B16A, N26 B20, N26 B20A. This set
includes important tools for adjusting camshaft and crankshaft, VANOS unit and for pre-tensioning the
timing chain.
More information regarding this item and a list of suitable engines and models can be found on our
website:
www.bgstechnic.com
SAFETY INFORMATION
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working with the engine running. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.
•
Keep children and other unauthorized persons away from the work area.
•
Be careful when working on hot engines because of the risk of burn injuries.
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
•
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
timing again.
•
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
BGS 62637
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Tabla de contenido
