Safety Instructions; Installing The Product; Connecting The Power Supply - nedis IREX150AT Manual Del Usuario

Safety instructions

-
WARNING
Only use the product as described in this manual.
•
Do not use the product if a part is damaged or defective. Replace a damaged
•
or defective device immediately.
Do not drop the product and avoid bumping.
•
This product may only be serviced by a qualified technician for maintenance
•
to reduce the risk of electric shock.
Disconnect the product from the electrical outlet and other equipment if
•
problems occur.
Do not expose the product to water or moisture.
•
Do not open the product.
•
If the power cable is damaged, it must be replaced by a special cable or
•
assembly available from the manufacturer or its service agent.
Only use provided parts.
•

Installing the product

4
Make sure all the devices you want to connect have been switched off.
1. Plug the IR receiver A
4
When using multiple IR receivers A
avoid interference.
2. Plug the IR transmitter A
5
3. Place A near an IR transmitter of your device.
5
4
Only 1 A can be connected per device.
4
To avoid interference keep the distance between your device and the IR
receiver 10 m apart from each other.

Connecting the power supply

There are multiple options to connect the IR transmitter A
Select one of the following:
Plug a 12 VDC @ 1 A adapter into the 12 VDC power port A
•
9
into the IR receiver port A
9
5
into an IR emitter port A
5
8
.
, keep a distance of at least 6 meters to
1
2
.
to a power supply.
3
.