Picture Setup - HC Cargo 161939 Manual De Instrucciones

161939
Operation of OSD Menu
Please use the menu under the circumstances of single image view.
Press "M" button for settings.
1. PAIRING

2. PICTURE SETUP

3. MIR-FLIP
4. CAMERA SETUP
5. SYSTEM
Note:
Press "M" to access main menu, then press "+" and "-" to select the icon for different functions.
Press "S" button to confirm your selection.
1. Pairing
Please be aware that to connect and turn on the monitor first, then connect the camera after
selecting pairing function which will improve pairing speed.
If you have two cameras to pair, please finish pairing one after another to ensure pairing accuracy.
Pairing start
50s
Pairing Process:
1. First select channel (CAM 1 / CAM2) via "S" button, then press "M" for the menu
and then select pairing function by pressing "S" button.
2. The countdown for pairing - "pairing start 50s" sign will be shown on the screen.
Please connect and start the camera at the same time.
3. The camera will pair with monitor automatically within about 5-10 seconds after startup.
Image will appear on screen if pairing succeeds.
4. If pairing fails, the sign "no signal" will be shown on screen.
Please follow the instructions and pair again.
5. If pairing still does not succeed, please use a needle or other sharp objects to stab the reset
button at the back of camera(see above picture on the right), then wait for a few seconds while to
see if pairing succeeds.
reset button
2. Picture setup
Press "+" and "-" to select picture options, then press "S" button
to confirm selection.
When the icon selected is in red color, you can make your
adjustment by pressing "+" and "-".
Press "S" to confirm your choice.
Press "M" to return to previous menu, press again to return to
main menu.
5
Vedpak 228_Version 1_01.2020