Husqvarna ROYAL 47RC Manual Del Operador página 10

Ocultar thumbs Ver también para ROYAL 47RC:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 40
CHARGE THE BATTERY
Before using for the first time
If your lawnmower is not used for more
than one month.
ALWAYS charge the battery immediately
after use!
1. Remove the safety key (C).
(If the safety key is not removed, the
Battery Charge Indicator light will flash
twice repeatedly for approximately 1
minute.)
2. Connect the charger cable to the socket.(D)
3. Connect the charger cable to the mains
supply and switch on.
4. WHAT THE LIGHT SHOWS
WHEN CHARGING (E1):
Flashing Red light
= Battery 0 - 5%
Steady amber light = Battery 5 - 30%
Flashing green light = Battery 30 - 60%
Steady green light
= Battery 60 -100%
Approximately 16 hours to full charge.
There is a usable charge when the light is
steady green or flashing green
Starting the lawnmower
1. Ensure the charger cable is disconnected
from the mains and the charger socket on
the lawnmower.
2. Always start the mower in short grass or on
a flat surface.
3. Insert the safety key in the slot.(F)
4. Pull the operator presence control (OPC
lever) (G).
5. Continue to hold the OPC lever in place and
press the starter button (H1) on the control
panel.
How to Mow
1. Start mowing from the outside edge of the
lawn, mowing in strips in alternate directions
(L).
2. Mow twice a week in the growing season,
your lawn will suffer if more that one third of
its length is cut at one time and this may
also result in poor collection.
Please Note:-
Do not overload your Lawnmower
When mowing in long thick grass a first cut with
the cutting height adjusted to its highest setting,
see Cutting Height, will help reduce motor
overload and will help prevent damage to your
lawnmower.
ENGLISH - 3
Battery Charging
5. WHAT THE LIGHT SHOWS
Steady green light
Flashing green light = Battery 60 - 35%
Steady amber light = Battery 35 - 10%
Flashing Red light
6. STEADY RED LIGHT WHEN MOWING
Use - Starting and Stopping
6. Release the starter button and continue to
7. Start to mow when the motor runs at normal
Stopping the lawnmower
1. Release the OPC lever.(J)
2. Remove the safety key to prevent
3. Always charge the battery immediately
Use - Mowing
Cutting Height Adjustment
1. Adjust to the desired cutting height by
Clearing ejection chute
1. If the ejection chute gets clogged, do the
2. Remove the safety key to prevent
3. Remove the grass collector and clean the
Transport
1. Remove the key to prevent unintentional
2. Carefully fold the handle.
3. Avoid damaging the cable and the display.
When charging is complete. Switch off at
the mains and remove the charger cable
from the socket (D).
NOTE
The Royal 47RC can be left connected to
the charger permanently, with the charger
switched on, without risk of overcharging.
WHEN MOWING (E1):
= Battery 100 - 60%
= Battery 10 - 0%
On starting the lawnmower, whilst the motor
gets to normal speed.
On stopping the lawnmower, when the brake
is engaged.
The lawnmower motor is overloaded - see
"How to Mow".
The battery needs to be charged.
For maximum battery life
ALWAYS charge the battery immediately
after use!
hold the OPC lever to keep the motor
running.(G)
speed.
unintentional starting when you leave the
machine. (K)
after use!
means of the lever on the right side of the
mower.(M).
following:
unintentional starting.
ejection chute.(N)
starting.
Tabla de contenido
loading

Tabla de contenido