Noise Data; Technical Data; Vibration Information - Worx WG730E Manual Original

12. LOWER HANDLE
13. BATTERY PACK* (SEE FIG. E)
14. BLADE BOLT (SEE FIG. N1)
15. BLADE (SEE FIG. N1)
*Not all the accessories illustrated or described are
included in standard delivery.

TECHNICAL DATA

Type WG730E WG730E.9 (7- designation of
machinery, representative of Cordless Lawn Mower)
Voltage
No load speed
Deck diameter
Cutting diameter
Front wheel diameter
Rear wheel diameter
Cutting height
14
Cutting height positions
Grass collection capacity
Battery type
Charging time
(approx.)
Machine Weight
** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage is
18 volts.
ACCESSORIES
Battery pack (WA3014)
Charger (WA3880)
Grass collection bag
We recommend that you purchase your accessories from
the same store that sold you the tool. Choose the type
according to the work you intend to undertake. Refer to the
Cordless Lawn Mower
WG730E WG730E.9
20V Max.**
3300 /min
31.6 cm
30 cm
140 mm
160 mm
30 - 70 mm
3
30 L
Lithium-Ion /
/
125 mins
10.4 kg 9.7 kg
WG730E WG730E.9
1 /
1 /
1
accessory packaging for further details. Store personnel
can assist you and offer advice.

NOISE DATA

A weighted sound pressure
K
pA
A weighted sound power
K
wA
Wear ear protection

VIBRATION INFORMATION

Typical weighted vibration
Uncertainty
WARNING: The vibration emission value during actual
use of the power tool can differ from the declared
value depending on the ways in which the tool is used
dependant on the following examples and other variations
on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
Using the correct accessory for the tool and ensuring it is
sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration accessories are used.
And the tool is being used as intended by its design and
these instructions.
This tool may cause hand-arm vibration syndrome if its
use is not adequately managed.
WARNING: To be accurate, an estimation of exposure
level in the actual conditions of use should also take
account of all parts of the operating cycle such as the times
when the tool is switched off and when it is running idle but
not actually doing the job. This may significantly reduce the
exposure level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and
keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti vibration
accessories.
Plan your work schedule to spread any high vibration tool use
across a number of days.
L = xx dB(A)
pA
3.0 dB (A)
L = xx dB(A)
wA
3.0 dB (A)
a = xxm/s²
h
K = 1.5 m/s²
EN