Idiomas disponibles
Idiomas disponibles
EN
PERMANENT
LIFTING MAGNETS
OPERATING AND MAINTENANCE INSTRUCTIONS FOR MODELS
ELM.250, ELM.500, ELM.1000, AND ELM.2000
FOREWORD
You have purchased a EUROBOOR lifting magnet.
We thank you for the trust you have placed in our product.
These instructions contain all the information required for safe
and optimum use of the lifting magnet.
Read the instructions carefully and follow the directions.
Keep the instructions in a safe place close to the workplace.
On delivery check that the magnet is undamaged and
complete. If the equipment is damaged or incomplete contact
your supplier immediately.
The complete delivery consists of:
ź
Magnet ELM.125,
ELM.2000
ź
Test certificate
ź
Operating and maintenance instructions ELM.125,
ELM.250, ELM.500, ELM.1000, and ELM.2000 incl. EC
Declaration of Conformity
Never use a damaged or incomplete magnet!
The ELM.125, ELM.250, ELM.500, ELM.1000, AND ELM.2000
are guaranteed for a term of 60 months.
The guarantee is not applicable to shortcomings that can be
wholly or partially attributed to:
failure to comply with the operating and maintenance
ź
instructions or use considered as being other than normal.
normal wear.
ź
modifications or repairs not performed by EUROBOOR or
ź
an authorised agent.
In all correspondence regarding your lifting magnet always
state the information displayed on the type plate.
We herewith declare that the lifting magnets
ELM.250, ELM.500, ELM.1000, and ELM.2000 are in
conformity with the provisions of the Machinery Directive
(Directive 2006/42 EG as amended), with the harmonised
standards EN 12100-1, EN 12100-2 and with national
implementing legislation.
Type ELM.125,
ELM.2000
ELM.
250,
ELM.
500,
ELM.
1000, and
ELM.125,
ELM.
250,
ELM.
500,
NAMES OF THE MOST IMPORTANT PARTS OF THE
LIFTING MAGNET
1
Magnet
2
Instruction plate
+ type plate
3
Lifting eye
4
Handle
5
Handle lock
plate
6
Pole shoes
TECHNICAL SPECIFICATIONS AND DIMENSIONS
ELM.125
Lenght (mm)
93
Width (mm)
60
Height (mm)
120
(incl. Lifting eye)
Weight (kg)
2,6
Tested Lifting
400
Capacity (daN)
Workload limit
125
for plates (kg)
Workload limit
50
pipe and tube (kg)
Ø min / max (mm)
50/100
For vertical manipulation capacity cca 20% of nominal ONLY!
DO THE TEST BEFORE VERTICAL MANIPULATION!
Albert Koster,
owner
ELM.
1000, and
ELM.
125,
3
2
1
6
ELM.250
ELM.500
ELM.1000
152
246
306
100
120
146
180
180
236
10
19
38
800
1600
3200
250
500
1000
125
250
500
60/200
65/270
100/300
4
5
ELM.2000
478
165
273
85
6200
2000
1000
150/350
