Stages cycling Power Manual Del Usuario página 7

Specifications
• Batteries AA x 2 – service life, approx. 2000 hours
• Wireless transmission: 2.4GHz, ANT+™ and Bluetooth® Smart
• Accuracy: +/- 2 % of measured power
• Power measurement range: (watts): 0-2500
• Cadence range (RPM): 20-220
• Water resistance rating: IPX7
This product is ANT+ certified and complies with the following specified
ANT+ Device Profiles:
Pairing the power meter
The power meter must be connected or "paired" to the Stages display
console or other compatible display (collectively referred to as head
units) via ANT+ or Bluetooth, according to the manufacturer's instruc-
tions. Each power meter has a unique ANT+ device ID and during the
pairing process the applicable device ID is recorded by the display and
will be used to communicate with the corresponding power meter. The
ANT+ ID number is printed in the locations shown in FIG 1 and also
supplied with the documentation. Once paired to the power meter, ride
data (Watts and RPM) will be transmitted from the power meter to the
display unit. Other important functions such as manually resetting the
power meter's zero offset will also be enabled through the display unit.
The ANT+ ID is permanently assigned to the power meter and is not
affected by changing the power meter battery.
To pair the power meter:
• Confirm that the power meter has fully charged AA batteries prop-
erly installed.
• Rotate the crank arm one time to ensure the power meter is awake.
• Follow the Stages console or other display device manufacturer's
instructions for pairing a power meter to the head unit.
www.thisisant.com/directory
English
7