VACHERON CONSTANTIN HEURES CRÉATIVES HEURE AUDACIEUSE Manual De Instrucciones página 5

Setting instructions
Winding and time setting:
The winding and time-setting crown (I) has three positions: A, B
and C.
A: Pushed down against the case.
This is the normal position when the watch is worn and guarantees
the best possible water-resistance. The watch can be wound in this
position.
B: Winding position.
When the winding and time-setting crown (I) is pulled out to this
position, it is easier to wind the watch. The watch must be wound
every day, if possible at roughly the same time. Do not force
the winding mechanism when you feel resistance is increasing.
Then push the winding and time-setting crown (I) back down to
position A.
C: Time-setting position.
When the winding and time-setting crown (I) is pulled out to this
position, the time can be adjusted. Turn the winding and time-
setting crown (I) until the hands point to the desired time. Then push
the winding and time-setting crown (I) back down to position A.
10
Water-resistance
The water-resistance of the watch has been tested at a pressure
of 3 bar.
11