GENERAL SAFETY INFORMATION
1.
Protect the light package power supply wires
from coming in contact with sharp objects, hot
surfaces, and/or chemicals.
2.
The lamp rating should not exceed 60 watts. Use
type T−10 lamp.
3.
Current draw at the convenience outlet should
never exceed 12 AMP.
4.
Wire lamp guard should be in place for safe
operation of unit.
WIRING
1.
All wiring must comply with applicable national
and local electrical codes; all authorities have
jurisdiction.
2.
Connect the lighting package to a 115 VAC power
source.
3.
The lighting package must be porperly grounded.
MAINTAINANCE
1.
Replacement lamps must be rated 60 watts or
less.
2.
Other than lamp replacement, the lighting package
requires no maintenance. The unit cannot be field
serviced; it should be replaced if damaged or
defective.
- 4 -
© 2018 Hoffman Enclosures Inc.
English
PH 763 422 2211 • nVent.com/HOFFMAN
87569319