Floor Mounting - Chauvet Professional MAVERICK FORCE S PROFILE Guía De Referencia Rápida

EN
Mounting
Before mounting this product, read the
mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps/.
Mounting Diagram
Omega
brackets (2x)
Safety cable
Control Panel Description
Button Name
<UP>
< >
<MENU>
< >
<DOWN>
< >
<LEFT>
< >
<ENTER>
< >
<RIGHT>
< >
Battery Powered Display
Press and hold until menu screen appears (approximately 15 seconds).
Technician Mode
The technician mode disables the pan and tilt motors, allowing the output of the product to be aimed by hand. To enable
the technician mode of the Maverick Force s Profile, hold <UP> and <LEFT> while the product is powering on. When the
product is turned off and back on, the pan and tilt will return to normal function.
3
QUICK REFERENCE GUIDE
Safety Notes. Use at least two mounting points per product. Make sure the
Overhead Mounting
Function
Navigates upwards through the menu list or increases the numeric value when in a
function
Exits from the current menu or function
Navigates downwards through the menu list or decreases the numeric value when in a
function
Navigates leftwards through the menu list
Enables the currently displayed menu or sets the currently selected value into the selected
function
Navigates rightwards through the menu list
Mounting clamp

Floor Mounting

Maverick Force s Profile QRG Rev. 1