Technical Data - Yamato RH 920/26 Manual De Instrucciones

cod. 99849 - mod. RH 920/26
DESCRIPTION
1. Dust Cap
2. Locking Sleeve
3. Drilling Depth Stop
4. Mode Selector Knob
5. ON/OFF Switch Locking Button
6. Reverse Knob
7. Speed Controller
8. ON/OFF Switch
9. Indicator Light
10. Auxiliary Handle

TECHNICAL DATA

Our Model number
Code
Tension
Protection
Power
Functions
Impact energy (joule)
Reversing operation
Chuck
Drilling capacity steel/wood/masonry
Impact per min B.P.M.
Net weight
Vibration: weighted acceleration m/s
Sound power level dB (A).
Noise/Vibration Information
Measured values determined according to EN 60745.
Uncertainty K=3 dB.
Wear hearing protection!
The typically weighted acceleration is on the above table.
The vibration emission level given in this information sheet has been measured in accordance
with a standardised test given in EN 60745 and may be used to compare one tool with another.
The vibration emission level will vary because of the ways in which a power tool can be used and
may increase above the level given in this information sheet.
Note: To be accurate, an estimation of the level of exposure to vibration experienced during a
given period of work should also take into account the times when the tool is switched off and
when it is running but not actually doing the job. This may significantly reduce the exposure level
over the total working period.
RH 920/26
99849
230 ~, 50 Hz
Classe ll
920 W
3+neutral
2,6 Joule
0~1100 g/min
26 mm. SDS Plus
26/13/30 mm
0~4820 Bpm
3,3 kg
Chiselling: 15,5 m/s
2
. Hammer drilling into concrete:
2
16,2 m/s K=1,5
LpA:93 dB
LpW:104 dB
2
K=1,5