Cleaning Instructions - darco Body Armor Manual Del Usuario

EN Use
1. Open the Body Armor® Heel Reliever heel protector. Remove the extra foam pad (photo D). Set the
extra pad aside and keep it available. You may need it later to customise the fit.
2. Place the patient's foot inside the support with the heel positioned above the heel suspension ope-
ning. The heel should be positioned behind the fixed foam pad (photo 1 + 2).
3. Pull the hook and loop straps across the shin towards the loops. Guide the straps through the loops.
Secure the straps with the hook and loop fasteners (photo 3). Allow the side flaps to overlap if the
calves are particularly narrow.
4. Check the fit. There should be sufficient space for your fingers between the heel opening and the bed
(photo 4). Do not fasten the heel protector too loosely or too tightly around the leg. The hook and
loop straps should not be in contact with the skin. The forefoot pad (photo E) can be used optionally
for protection between the hook and loop strap and foot (photo 5).
5. Instructions for use: Depending on the patient / indication, either use a heel protector with smooth
or convoluted surface (photo 1).
Customising the fit:
> Foot drop: Secure the extra foam pad in a vertical position behind the sole of the foot (photo A).
> Malleolar decubitus (ankle ulcer): Cut away the nubs surrounding the ankle on the inside of the
support. Cut a portion of the fixed foam pad if necessary (photo B).
> Hip rotation: Fix the positioning wedge (photo F) to the heel protector, according to use.
> Bariatric legs: If the heel comes into contact with the bed sheet, add the extra pad on top of the fixed
pad for increased elevation (photo C).
> Achilles tendon: If redness occurs in this area, cut a "V" shape out of the fixed pad. If using both foam
pads, also customize the upper foam pad (photo C).
Note
The pressure on the heel is redistributed to the heel cord and gastrosoleus complex. The product
should be removed regularly according to local guidelines and the leg and foot should be exa-
mined for skin lesions. Should redness (erythema) occur, a V-shaped wedge should be removed
from the fixed pad in the area of the heel cord. Oedematous patients should use the smooth
Body Armor® Heel Reliever version to avoid skin irritation.
Combination with other products
No specifications
Working life / Lifespan of the product
The lifespan of the medical device is determined by natural wear and tear due to proper handling/
cleaning.
Maintenance
The product does not require maintenance.

Cleaning instructions

Hand wash:
> Use mild detergent and warm water. Allow to dry at room temperature.
Machine wash:
> Close hook and loop straps and wash in the provided laundry bag (photo G) or a pillowcase (60°C).
Allow to dry at room temperature.
> Disinfection after washing: With an antiseptic spray
Water, standard cleaning agents and disinfectants can be used for cleaning. The hook and loop strips
should always remain closed during cleaning.
Disposal
Dispose of after use Please dispose of the packaging in an environmentally manner.
The product can be disposed of with household waste.