Assembly - oneConcept 10030087 Manual Del Usuario

Assembly

Install the main brush
If you want to use the main brush
shown in the picture on the right con-
nection.
Install the connecting joint
Insert the 2-in-1 crevice/brush tool
into the connecting joint. It does not
click into place. Insert the connecting
joint into the main body until you hear
an audible clicking noise.
To disassemble the 2-in-1 crevice/
brush tool from the pole,pull the 2-in-
1 tool straight out from the connecting
joint. Press the red pole attachment re-
lease button then remove the connect-
ing joint.
Remove and install the dust cup
You can use the aluminium tube to ex-
tend the head (when you have heard
a click during installation, the installa-
tion has been successful), and then the
other side of the connect accessories in
the pipe (right), so that it can be used
as vertical vacuum cleaner.
13