Media Player Connection - Fusion Apollo RA770 Guia De Inicio Rapido

3
Select a zone.
Adjusting the Volume
Using this stereo, you can control the volume of any zone on any stereo
connected to the Fusion PartyBus network.
1
Turn the dial to adjust the volume for the home zone on the stereo.
2
If necessary, press the dial to switch between zones.
NOTE: If this stereo is part of a group, you can adjust the volume of all
stereos in the group or individual zones on each stereo (page 4).
TIP: You can press and hold the dial to adjust the subwoofer level of a zone.
Creating or Editing a Group
Before you can create a group, you must connect multiple compatible stereos to
the Fusion PartyBus network. See the installation instructions provided with your
stereo for installing and configuring the network.
You can combine compatible stereos on the network into groups. Grouped
stereos can share available sources and control media playback and volume on
all of the stereos in the group, which allows for a synchronized audio experience
across the vessel. You can quickly create, edit, and break up groups as needed
from any compatible stereo or remote control on the network.
NOTE: You can adjust the volume of any zone on any compatible stereo on the
network, regardless of whether or not those stereos are in the group.
A zone stereo, such as the Apollo
and play sources from other stereos, but it cannot share its sources with the
group.
You cannot change the settings when a stereo is part of a group.
For additional considerations about groups and sharing sources, see the owner's
manual.
1 > GROUPS.
Select
TIP: You can hold from any screen to open the GROUPS menu.
4
™ SRX400, can create or join a group to control
2
Select the name of the stereo you want to be the primary stereo in the group,
or select the name of an existing group.
3
Select the stereos you want to add to or remove from the group.
4 Select DONE.
Selecting a Source
1
Select .
2
Turn the dial to highlight a source.
NOTE: If the device is part of a group, continue turning the dial to access the
sources on other devices in the group (page 4).
If a source cannot be shared with the group, it will appear gray and you
cannot select it.
3 Press the dial to select the source.
Adjusting the Backlight and Dial Brightness
NOTE: If you connected the dim wire on the wiring harness to the boat's
illumination wire, the backlight and dial dim automatically when the boat lights are
on. This may affect how you adjust the brightness setting.
1
Select > BRIGHTNESS.
2
Adjust the brightness level.

Media Player Connection

CAUTION
Always disconnect your media player from the stereo when not in use and do not
leave it in your vessel. This helps reduce the risk of theft and damage from
extreme temperatures.
Do not remove the media player or use your stereo in a distracting manner while
operating the vessel. Check and obey all marine laws in association with use.
The stereo accepts a variety of media players, including smartphones and other
mobile devices. You can connect a compatible media player using a Bluetooth
Quick Start Manual