Tabla de contenido
Idiomas disponibles
Idiomas disponibles
OPERATING AND CHARGING INSTRUCTIONS (continued)
1. Before using the Mobile PowerWrap for the first
time, please charge the battery pack for at least
4 hours for optimal use.
2. Plug the Connector Wire (C) attached to the
Controller (B) into the Adapter (E) and plug the
Adapter into a 120 volt AC electrical outlet to
charge the battery pack.
3. The indicator lights on the Controller (B) will
alert you to the status of charging:
Red + 1 Blue Light
Red + 2 Blue Lights
Green + 2 Blue Lights = Fully Charged and
4. The Mobile PowerWrap is equipped with a custom
4AA NiMH (Nickel Metal Hydride) battery pack
that is rechargeable for 500 times. The battery
pack never needs to be removed. For optimal
performance, drain the battery pack after each use
and fully recharge to 100% before using again.
5. The Mobile PowerWrap has 2 heat settings, HIGH & LOW, and
maintains the same temperatures as an electric heating pad for
the optimum therapy.
HIGH Heat Setting = 1 hour of battery life
LOW Heat Setting = 2 hours of battery life
6. To turn the Mobile PowerWrap ON, press and hold the POWER button
on the Controller (B) for approximately 2 seconds until the LOW heat
setting light turns blue. For the HIGH heat setting, press the POWER
button once more until the HIGH heat setting light turns blue.
To go back to the LOW heat setting press the POWER button once.
To turn the Mobile PowerWrap OFF, press and hold the POWER button
until all lights are off (approximately 2 seconds).
4
= Charging
= 80% Charged
Ready for Use
B
C
E
Tabla de contenido
