Brandson Equipment 305055 Manual Del Usuario página 7

4. Initial use
Take the device out of the package and remove all the packaging material. Place
the lamp on a flat and even surface, so that it does not fall over.
Then connect the supplied USB-A to coaxial connector cable to a properly config-
ured USB port (e.g. a smartphone charger) and to the lamp, to operate it.
Press the "On/Off/Mode button" to switch on the lamp. If you press the button
quickly in succession, you can navigate through the different levels of brightness.
The sequence is as follows:
• Brightness level 1
• Brightness level 2
• Brightness level 3
Press the "On/Off/Mode button" longer to change between the three light
modes:
• Natural
• Warm white
• Cool white
5. Safety instructions and disclaimer
Never try to open the device to repair or to make modifications. Avoid contact with
the mains voltage. Do not short-circuit the product. The device is not approved
for outdoor use. Therefore please use it only in dry surroundings. Protect it from
high humidity, water and snow. Keep the device away from high temperatures. Do
not expose the device to sudden changes in temperature or strong vibrations, as
this could damage the electronic components. Check the device for any damage
before using it. The device should not be used if it was subject to impact or has
been damaged in some other manner. Please comply with the local regulations
and restrictions. Do not use the device for purposes other than those described in
the user manual. This product is not a toy. Keep it out of the reach of children or
mentally disabled persons. Any repair or modification to the device, which is not
carried out by the original supplier, will void any warranty and guarantee claims.
The product should be used only by persons who have read and understood this
English
7