yellow jacket 52070F Instrucciones De Operación página 8

5. Run the Thermview+ app on the iOS or
Android device.
6. Connect the iOS or Android device with
the 52070F thermal imager.
7. Point the thermal imager at the area
of interest.
8. Short press the trigger to capture the
image. The display will freeze
and the "hold" icon will be displayed.
9. To discard the image, short press the
trigger again and the display will
return to live mode.
10. Press "SHARE" to transfer the image
IMAGE CAPTURED. NOTE:
to the iOS or Android device
HOLD IS DISPLAYED
via Bluetooth
11. If the image is transfered successfully
to the smart devices, the thermal imager
display will return to live mode.
RECEIVE, ANALYZE, AND SAVE THE IMAGE
®
TRANSFER IMAGES VIA BLUETOOTH
HAVE BEEN SAVED ON THE THERMAL IMAGER
1. Press the OK button to enter the
2. Access the Setup Menu buy pressing
3. Press the OK button to enter Setup menu.
4. Turn Bluetooth
5. Run the Thermview+ app on the iOS
6. Connect the iOS or Android device with
7. In the Settings Menu, access the Image
8. Press the trigger to share the
9. Press "SHARE" to transfer the image
REVIEW OR DELETE IMAGES THAT HAVE BEEN
SAVED ON THE THERMAL IMAGER
1. In the Settings Menu, access the Image Review mode
Use the Review Mode to view or delete stored images.
2. To access the Settings Menu to review and delete images.
3. Press the back button to exit the image review mode
4. To delete all images, please access the Settings Menu and reformat
the SD card.
THAT
®
Settings Menu
the Down Arrow button
There are three available options:
Bluetooth ® , Brightness, and Auto Off
ON
®
or Android device
the 52070F thermal imager.
Review mode
current picture.
to the iOS or Android device.