Introduction; Supplied Accessories; Installation - TTI TCB-660 Manual De Instruciones

1. Introduction

TCB-660 transceiver is designed to have a good performance
in any conditions that the transceiver operates, using rugged
build chassis, PCB's and components. This transceiver is also
designed for users' convenience, implementing human
ergonomics to locate the knobs and buttons in the proper
places. The combination of well designed knobs and buttons
as well as user friendly graphic layouts will lead users to
quickly adapt themselves for the easy operation. The newly
applied menu mode will make professional users more
satisfactory with pleasure. The elegant and luxury blue LED
light supporting the face design will go well with any vehicles.
This instruction manual has been designed to enable you to
get the best use from your CB Transceiver, therefore you are
recommended to take a few minutes to read this instruction
manual before initial use of your CB Transceiver.

2. Supplied Accessories

Your transceiver is supplied with a full range of accessories to
help you get started and virtually benefit from all the features
straight away.
TCB-660 transceiver
Microphone with cord
Power cable
Radio mounting bracket
Radio mounting thumb screw with rubber washer
Mounting screw with washer (for transceiver bracket)
Mounting screw with washer (for microphone bracket)
Microphone mounting bracket

3. Installation

Plan the location of the transceiver and microphone first, which
is most convenient for the operation. The transceiver should
normally be mounted horizontally, but may be mounted
vertically. The bracket supplied can be fitted above or below
the case allowing the TCB-660 to be cradled by the bracket or
suspended from it.
TCB-660
1 unit
1 unit
1 unit
1 unit
2 pieces
3 pieces
2 pieces
1 piece
3