C Side Panel Base Position - ubabub Pod U0400 Instrucciones

C
Side panel and
base position
Step 1 Select constructed side panel from section B and ensure side with bolt holes
faces towards the inner of the crib.
Step 2 Rest side on edge of plastic base, aligning bolt holes.
Step 3 Starting with the center hole, using 55mm bolts attach side to base –
finger tighten only.
Step 4 Insert left and right bolts, finger tighten only.
Step 5 Once all three bolts are in place check alignment and tighten with Allen Key
Please Note: Do not over-tighten.
Step 6 Repeat steps 1–5 on other side.
10