Westward 3ZC68C Instrucciones De Operación

Operating Instructions and Parts Manual
Please read and save these instructions. Read through this owner's manual carefully before using product. Protect yourself
and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in
personal injury and/or damage to product or property. Please retain instructions for future reference.
Description
Westward Hydraulic Body Repair Kits are designed to be used for pushing, spreading, and pressing of vehicle body
panels as well as various component parts and assemblies. A variety of attachments are included.
Handle
Oil Filler Screw
Specifications and Dimensions
Model Capacity
3ZC68C 4 Ton (3,628 kg)
3ZC69C 10 Ton (9,071 kg)
General Safety Information
Save these instructions. For your safety, read, understand, and follow the information provided with and on this
device before using. The owner and/or operator shall have an understanding of the device, its operating characteristics
and safety operating instructions before operating the equipment. The owner and/or operator shall be aware that use
and repair of this product may require special skills and knowledge. Instructions and safety information shall be read
to and discussed with the operator in the operator's native language, making sure that the operator comprehends their
contents, before use of this equipment is authorized. If any doubt exists as to the safe and proper use of this device,
remove from service immediately.
Inspect before each use. Do not use if abnormal conditions such as cracked welds, damaged, loose or missing parts
are noted. Any equipment that appears damaged in any way, is found to be worn, or operates abnormally shall be
removed from service until repaired. If the equipment has been or is suspected to have been subjected to an abnormal
load or shock, immediately discontinue use until inspected by a factory authorized repair facility (contact distributor
or manufacturer for list of authorized repair facilities). It is recommended that an annual inspection be made by an
authorized repair facility. Labels and Operator's Manuals are available from the manufacturer.
When using extension tubes and/or offset attachments, reduce rated capacity by 50% for
each tube or offset attachment connected. See Replacement Parts section on page 4 for identification of
"offset" attachments.
Study, understand and follow all instructions before operating this device. Wear eye
protective that meets ANSI Z87.1 and OSHA standards. Do not exceed the rated capacity. Use a pressure
gauge that indicates pounds of force applied. When using extension tubes, position the shortest tube farthest
from the cylinder. Do not subject the hose to extreme cold, heat, sharp surfaces, abrasion or impact. Do
not allow the hose to kink, twist, curl or bend so tightly that it restricts fluid flow. Make sure setup is stable
and secure before performing any work. No alterations or modifications shall be made to this product. Only
components supplied with this kit shall be used with this kit. Failure to heed these markings may result in
personal injury and/or property damage.
SHI005
Printed in China
072016
Hydraulic Ram System Kits
Figure 1- Hydraulic Ram System Kit Components
Min Saddle Extension
11" (27.94 cm)
13-5/8" (34.61 cm)
Ram Plunger
Release
Valve
Hose
Coupler
Hose
Max Saddle Extension
3ZC68C and 3ZC69C
Ram Coupler
Dust Cover
15-3/4" (40.01 cm)
19-3/4" (50.17 cm)