Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1. Set the Blade Guard against the top of the Riving Knife so that the Rollers slide into the slot at the top
of the Riving Knife. See Figure 14.
2. Pull down on the Guard Locking Lever, fastening the Blade Guard in place.
3. Make sure the Blade Guard is fully engaged, aligned properly and does not contact the Blade.
Attaching and Adjusting the Fence
WARNING! Before installing the Fence, make sure the Table Saw is disconnected from its electrical
power source.
1.To attach Fence (121) to Work Table (91), raise Fence Handle (110) and slip the Fence Rear Plate (125)
over the back edge of Table. See Figure 15.
2. Lower the Fence all the way onto the Table and lock in position by lowering the Fence Handle.
16
www.ELITETOOLS.co
Keep Working
Tabla de contenido
