Cleaning Solutions - Nilfisk MX 107 C Instrucciones De Uso

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
INSPECTION:
Carefully unpack and inspect your MX 107 C for shipping damage. Each machine is tested and
inspected before shipping. Any shipping damage incurred is the responsibility of the carrier. You
should notify the carrier immediately if you notice damage to the box or to the machine or parts

CLEANING SOLUTIONS:

We recommend liquid cleaning chemicals. Powder chemicals may be used, but unless mixed very
thoroughly they could cause a build-up in the pump, lines, heat exchanger and/or quick disconnects.
Any problem caused by a chemical build-up is not covered by warranty. Use a neutral cleaner with
a pH between 6 and 9 to avoid premature wear of the pump, seals, and/or other components.
Damage caused by the use of strong chemicals is not covered by the warranty.
MAINTENANCE:
For optimum performance flush the machine with clear water at the end of each working day. Once
a month, minimum, run a flushing compound through the machine to break up any mineral or
chemical build-up that may have formed. The vacuum motors and the pump do not require any
scheduled maintenance; however, the vacuum motors may require replacement brushes after 1000 -
1500 hours. Clean the body with an all purpose detergent, and protect it with an automobile interior
polish. Lubricate the wheels, castors, and quick disconnects with an all purpose silicone spray.
RECORD AND KEEP THE FOLLOWING INFORMATION
Serial Number: __________________
Model: MX 107 C
Purchase Date:_____________
Write the name and phone number of your
distributor:
_____________________________________
_____________________________________
(and don't forget to register your warranty)
.
6 0 0 1 0 1 0 7 1 R E V A
Tabla de contenido
loading

Tabla de contenido