MoJack PRO Instrucciones De Montaje Y Funcionamento página 8

Operating Instructions for use with MoJack EZ
STEP 3
Raising the Mower
Do not attempt to lift more than 200 lbs.
The MoJack must be used on a solid level surface.
The mower engine must be turned off.
If using the WorkBench Inserts, do not install past
safety sticker.
STEP 4
Raising Lift Arm to Locking Position
Safety Hole.
the Carrier passes the Safety Holes on the Tower when raising.
held out by the operator until it clears the bottom Safety Hole.
STEP 5
Lowering the Mower
Pin out and turn the Crank Handle
counterclockwise until Wheel Pads
are firmly on the ground. The Carrier
Locking Pin must be pulled out until
it clears the bottom Safety Hole.
MoJack WorkBench
Carrier
Locking
Pin
Pull Out
to Unlock
and Lower
Safety Hole
8
Carrier
Locking
Pin
Safety Hole
Safety Holes
Tower Locking Pin
Pull Out
to
Unlock
and
Lower