Slendertone Arm Toner Manual De Usuario página 7

English
charge your unit
1. Insert your charger into a socket and then connect it to your unit. It will take approxi-
mately 2-3 hours to fully charge the battery. Your unit is fully charged when all three
sections of the battery icon are full. The battery icon will flash when the battery is low
and needs to be recharged.
2. Always diconnect your unit from the charger when the battery is fully charged.
1
2
3
4
garment set-up
3. Connect the unit to the garments. The unit and garments must be connected
properly for your to work. "Click" the unit connector into the garment
ARM TONER
connector.
4. Place the garments with the four silver studs facing towards you. Remove the
adhesive GelPads from their pack. You will notice that one side of each GelPad has
a grid pattern on it while the other side is plain black.
5. Remove the covers from the patterned side of the four GelPads. Place the patterned
side of the GelPads over the silver studs and within the white lines.
6. Remove the covers from the black side of all four GelPads. Do not throw these away
as you will need to put them back onto the GelPads at the end of your session.
Note:
You should only use GelPads as other kinds may reduce the effectiveness
SLENDERTONE
of the exercise.
5
6
www.slendertone.com
7