Sanus VLT5 Manual Del Usuario página 9

4. Place the wall plate template
template and tape in place.
10
NOTE: For assistance in determining wall plate location, see HeightFinder at sanus.com.
IMPORTANT
: Be sure you mark and drill into the center of the stud.
5. Drill the four pilot holes using a 5.5 mm (7/32 in.) diameter drill bit.
IMPORTANT
: Pilot holes must be drilled to a depth of 89 mm (3 1/2 in.).
4
at your desired height and position the slotted holes over your stud center lines. Level the wall plate
10
10
5
10
89 mm
(3 1/2 in.)
5.5 mm
(7/32 in.)
9