Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Carpet Cleaner
3.
Plug the power cord into an electrical outlet. Turn the Carpet Cleaner on using the
switch on the side.
4.
Step on the handle release button on the back of the Carpet Cleaner to lower the
handle into the cleaning position.
5.
Squeeze the solution release trigger and pull the Carpet Cleaner in a backward
motion. Release the trigger and using a steady, moderate forward and backward
motion (about 1 second per foot) push the Carpet Cleaner in the same path to
agitate and remove the dirty water and solution from the carpet. NOTE: For heavily
soiled areas repeat if necessary.
6.
Work in a direction that ensures you will not walk on wet carpeting.
7.
When the dirty water tank is full, lift the water tank latch and remove it from the
base using the handle.
8.
Twist the water tank outlet cap located on the bottom of the tank to the left and
remove. Then empty the tank, rinse it, and replace the cap. Replace the tank to
resume cleaning.
9.
When you are finished cleaning, remove both the clean and dirty water tanks, rinse
with warm water and allow them to dry thoroughly before replacing the tanks for
storage.
10. Remove the exhaust filter on the top right side of the dirty water tank, rinse with
warm water and allow it to dry thoroughly before replacing.
AFTER CLEANING
Allow the carpet to dry thoroughly before walking on it. If you must walk on it place clean
white towels on the carpet first. After it is thoroughly dry vacuum the carpet.
AFTER SALES SUPPORT / SERVICIO DE POSTVENTA
888-367-7373
MODEL: VC9385S
_______________ _________
PRODUCT CODE: 4366 03-2015
____USER INSTRUCTIONS
7
Tabla de contenido
