Kalorik EM 47774 Manual De Usuario página 6

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

NOTE: There are two sets of blades, a serrated blade and a fillet blade,
as mentioned in the PRODUCT DESCRIPTION section. Make sure to use
the matching blades for the desired function.
Connecting the blade
Hold the assembled blades by the plastic guard in one hand (serrated
edges facing down) and the motor unit / handle in the other hand with
the power button in the upper most position. Carefully insert the blades
(serrated edges facing down) into the slot on the power handle with
buttons facing upwards and push gently until they click securely.
NOTE: You will notice that the blades should be approximately 2" apart
and on either side of a small lug at the point that they enter the power
handle. Take extra care to make sure the blades are still connected at
the tip.
Clean the appliance
-
Remove any dirt and dust from your knife before its first use.
-
Clean the handle with a damp cloth.
-
Wash the blades separately with hot, soapy water.
-
Dry all parts thoroughly.
www.KALORIK.com
Rivet and keyhole slot
Blade slots
Lug
6
EM 47774 - 200605
Tabla de contenido
loading

Tabla de contenido