Part Description - EAS ELECTRIC EMTD8HP Manual

Part description

Part Description
Container
Power Cord
Drum
Lint Filter
Accessories
The following parts are optional for specific models.
If your dryer has following parts, please
below .
Installation step:
Step 1: removing the drain hose from the
Step 2: insert the external drainage hose.
V.1
Control panel
Door
Air inlet
Handle
Maintenance cover
install them following the instruction
Hose holder(optional)
Condensing drain
hose(optional)
hose connector using plier.
8
Catalogue
Part description
Step 3: put the hose holder on the washing basin or any other sink.
200cm
Quick start
1.Check if the container and filters
have been cleaned up
2. Open the door and
load the laundry
3. Close the machine door
4. Plug the power cord and
press the【On/Off】button
5. Select the desired
programme
6. Press the 【Start/Pause】button
10.Unplug the power cord
9. Clean the filters and
empty container
8.Press the 【 】button
On/Off
7. Remove the laundry when
finished
V.1
9