Attach to Cut Station or Stand
Fasten to chop-saw stand or cut station using appropriate
hardware such as 5/16" diameter bolts or lag-screws and
corresponding washers (not included).
When using a bench-type cut station, it is convenient to
fasten some dimensional lumber in place as 'spacers'
before attaching your shear.
A
Step 1 - To unlock, gently press handle down, slide
Cam-Lock (A) in and down.
!
DO NOT CUT HARDWOOD WITH THIS SHEAR!
8 of 20
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com
ASSEMBLY
Note: 620-SID shown, MS20-0626 uses one large bracket.
PRODUCT OPERATION
Step 2 - Place material (B) on table, and slide under blade
to desired cut position.
Step 3 - Push handle (C) down until material is completely cut.
NOTICE
C
B
!
WS# 2642