Cleaning
To extend the lifespan of the appliance, it is recommended to clean it at
least once a week.
•
Switch off and unplug the appliance.
•
Do not immerse the appliance in water to clean it.
•
Wipe the base with a soft damp cloth and wipe it dry. To avoid
scratches, do not use abrasive cleansers or hard brushes. Do
not immerse the base in water or put it under running water.
•
Fill the water tank about half full and add ¼ cup of vinegar. You
can use a soft brush to clean the tank. Remove the water and
rinse the tank thoroughly.
•
Note: The water tank should be cleaned once a week.
•
Use a solution that is ½ vinegar and ½ water to clean the
ultrasonic disc. Pour the solution onto the disc and leave for at
least half an hour. Use a soft brush to gently clean the disc.
Pour out the solution and rinse with clean water several times.
Note: Be careful not to get water on the digital display, the
electrical components of the base or the power cable. Do not
immerse the base or the power cable in water.
Troubleshooting
Problem
Humidifier doesn't work
The light is not coming on
and no air or mist is
produced when the
appliance is switched on.
Make sure it is properly plugged into a
power supply socket.
Switch the appliance on by pressing the
ON/OFF icon on the base or the remote
control.
Check that the water tank has enough
water in it.
Check that the water tank has been
positioned correctly.
Make sure the humidifier is properly
plugged into a power supply socket.
Solution