Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Replacing Bulb:
1.Switch off the extractor hood and isolate the extrator hood by pulling out the mains plug or
switching off the fuse.
2.Remove the grease filter.
3.Replace the lamp(commercially available filament lamps (max.40watts) or halogen lamp
(max.28watts),E14 lampholder).
4.Reconnect the power by inserting the mains plug or by switchingonthe fuse.
Clean ventilation fans frequently. Grease should not be allowed to accumulate on
fan or filter.
Cleaning Instruction
Disconnect range hood from power supply before cleaning or servicing.
1. Cleaning the surface of hood frequently. Use mild soap or detergent to clean the hood.
2. Do not use harsh alkalis or abrasives
3. Avoid the use of scouring powers or dishwasher compounds.
4. Grease filter may be washed using mild soap or detergent. In normal operation (1 to
2 hours daily), the Grease filter must be cleaned after 2 months. (heavy grease build-
up may not be cleaned easily and the filter may require replacement)
5. Charcoal filter cannot be cleaned. Depending on the frequency of use and the type of
cooking, the expected life of Charcoal filter is from 1 to 6 month. Replacement is required.
When cleaning water must not inter into motor, control switch etc. electrical parts.
V.4
Tabla de contenido
