Vyrsa VYR-6051 Manual Del Usuario

You have purchased a quality electronic water timer using an efficient solenoid snap-on/snap off valve.
Please read these operating instructions carefully to familiarise yourself with the water timer's features,
correct installation and use. Check that the program(s) is/are performed as you plan when the timer is used
for the first time. This timer should only be operated by adults who are familiar with the operating instructions.
Designed Use. This Electronic Water Timer is designed for use outdoors only, in gardens, for the control of
sprinklers and water systems. The Water Timer must not be used for industrial purposes or in conjunction
with chemicals, foodstuffs, flammable or explosive materials.
Technical Data.
Operating Voltage:
Static Current:
Battery life:
Time error:
Operating temperature 5°C to 60°C
Water pressure:
Key Lock:
How the Electronic Water Timer works. Your electronic water timer will water your garden and hanging
baskets completely automatically according to the program you choose. You can set
your garden early in the morning or late at night when water evaporates the least. It will continue to water
whilst you are on holiday. It provides two flexible methods to control irrigation:
1. Manual: press Man/Auto button to switch between: On - Off – Auto. 2. Automatic: Can water up to 8 times per day. Choose quickly from 15 different day combinations to
control which days of the week the timer operates.
TIMER INSTALLATION:
1. Unscrew and remove waterproof cover. Slowly slide out the battery box from its compartment in the face
of the timer. Install two new 1.5V alkaline batteries (size AAA). Replace battery box.
2. Hold the unit steady. Loosen the LARGE LOCKING COLLAR RING located in the top of the timer until
the inner FAUCET COLLAR is loose. Screw the FAUCET COLLAR onto the faucet/tap until it is hand
tight, and then hand tighten the LARGE LOCKING COLLAR RING. Turn on the faucet/tap to open the
flow of water. (DO NOT USE WRENCHES OR PLIERS TO TIGHTEN THE COLLARS.)
Function Keys and Display.
•
Keyboard lock: Press Esc for more than 3 seconds to set. Press again for 3 seconds to unset.
•
Time set: Ensure keyboard is unlocked. Hold "time" key down whilst pressing alternately "min", "hour"
and "day". A light touch advances by one unit, holding down the min or hour advances time quickly.
•
Program set: see below.
•
Esc key: acts as a clear button for individual program time sets. Does not clear the current time.
Electronic Water Timer VYR-6051
DC 3v. (use a high power alkaline battery)
less than or equal to 18uA
1 season (6 months) normal use.
+0.25 second per day
0.05bar to 0.8 bar
Simple to set and unset. Prevents unauthorised/accidental program changes.
1.
2.
.
3.
4.
Time: Sets the current time and day. Keep it pressed, then press:
- Minute: Press to advance one minute. Keep pressed for fast op'n.
- Hour: Press to advance one hour. Keep pressed for fast op'n.
- Day: : Press to advance to next day, displayed above time.
Battery low indicator, when the indicator flash means no battery,
need to replace the battery.
LCD Display
Man/Auto: Switches between on – auto – off. Indicated by arrow.
st
Prog: Press to show 1 on, then hour, minute, day, to program time.
Esc: Clears set program time. Press for 3 secs to lock keyboard.
the timer to water