Work LANDROID M Guia De Instalacion página 14

3. Connect the base to the boundary wire
14
EN
OUT
IN
IN
OUT
3.1
Cut the end of the wire to a length that's appropriate
convenient for reaching the clamps.
NOTE: Too long redundant wire may cause the signal problem.
Strip the two ends of the wire.
3.2
When connecting to the charging base there is an IN wire
and an OUT wire, as shown. Connect the IN-wire to the red
clamp of the charging base and the OUT-wire to the black
clamp. Then close the cover.
NOTE: Please fix the boundary wire around the charging
base firmly with the wire pegs.