Tabla de contenido
Idiomas disponibles
Idiomas disponibles
9. Light Kit Assembly (Optional). (cont.)
If you wish to use your fan WITH the light kit,
connect male plug from switch housing to female
plug from light kit fitter. Make sure plugs connect
tightly.
Carefully arrange wiring in fitter plate and align
holes in switch housing cap with holes in fitter
plate. Re-insert screws that were previously
removed. Tighten all 3 screws with Phillips
screwdriver.
Install 2 medium base compact fluorescent 13-watt
bulbs (included).
Important: When replacing bulbs, please allow
bulbs and glass shade to cool down before
touching.
Remove finial, finial plate and threaded washer
from threaded rod on light kit fitter.
Carefully place glass shade inside metal band.
[Make sure glass shade sits completely INSIDE the
metal band.] Use small tabs in metal band to secure
glass shade--make sure to bend each tab completely
over edge of glass.
Raise glass shade in order to guide pull chains
through corresponding holes. Align threaded rod
on light kit fitter with hole in middle of glass shade
and push up gently allowing threaded rod to come
through hole. (Be sure pull chain for fan operation
does not rub against bulb during operation.) Secure
glass shade with threaded washer. Note: Do NOT
overtighten threaded washer as glass may crack or
break. Align hole in center of finial plate with
threaded rod, allowing pull chains to come through
appropriate holes in finial plate, and push up.
Thread center pull chain through hole in finial and
re-attach finial. Note: Do NOT overtighten finial as
glass may crack or break.
motor housing
male plug
female plug
reverse
switch
bulb
finial
light pull
chain extension
diagram 1
Hg
Manage in accordance with Spills, Disposal and Site Cleanup
Requirements. In case of breakage, follow clean-up
procedures provided by contacts below.
www.epa.gov/cflcleanup
1-866-284-4010
page 8
switch housing
switch housing cap
light kit fitter
threaded rod
glass
shade
metal band
threaded washer
finial plate
fan pull
chain extension
LAMP CONTAINS MERCURY
Capítulos
Tabla de contenido
